The official dartboard measurements are very important to know for all of you. You’re mistaken if you think you will set up a dart board somehow and start playing. If you don’t follow the correct height and distance to set up the dartboard, then you will not be able to increase your skill as a beginner or professional. You must place the correct dartboard height and the distance from the throw line to the dartboard must also be accurate.
There is nothing too tense about it. It’s easy to set up a dart board as per the correct dartboard height and distance regulations. Just follow this guide below and enjoy playing your favorite variations 301, cricket, and around the clock after setting your dart board as per official measurements.
Correct Dartboard Measurements
It’s better to say here, that if you use steel tip darts for bristle dartboards and soft tip darts for electronics dartboards, then in that case, dart board height from the floor doesn’t matter. You can set up both dart boards at the same height. The correct dartboard height is 5 feet 8 inches, which is vertically from the floor to the bullseye. When it comes to dartboard distance from the throw line, there is a difference in measurements.
Correct Dartboard Height – Vertical
The official correct dartboard height is 5 feet 8 inches (1.73 meter). This height is exact vertically from floor level to the bullseye center point. See the below diagram for your well understanding.
Correct Dartboard Distance – Horizontal & Diagonal
The official correct dartboard distance depends on your use of the different dartboard. Here, followed the two different measurements for steel tip darts and Soft tip darts.
The horizontal distance is 7 feet 9.24 inches (2.37 meters) the steel tip darts from the dartboard front end to the throw line. The horizontal distance is 8 feet (2.44 meters) for the soft tip darts from the dartboard front end to the throw line.
The Diagonal distance is 9 feet 7.38 inches (2.93 meters) from the throw line to the center point of the bullseye for the steel tip darts. The Diagonal distance is 9 feet 9.5 inches (2.98 meters) from the throw line to the bullseye for the soft tip darts.
Keep that in mind, this distance of measurement is not from the wall to the throw line. It is always measured from the dartboard’s front end for horizontal. In terms of diagonal, you must be measured from the inner bullseye to the throw line. In some cases, laser alignment systems may be used to ensure accuracy in setting up the dartboard distance. You can see the below diagrams for a perfect understanding.
Importance of Correct Dartboard Height and Distance
If you confirm that the board is set up at the correct height (5 feet 8 inches from the floor level to the center point of bullseye) and distance (7 feet 9.25 inches from the throw line to the front end of the dart board), then it’s suitable for playing any game variation. After this, following standard measurements ensures fair play in different venues and competitive tournaments.
If you are playing with the correct height and distance it will help to improve your throwing skill, accuracy, and confidence. Regular practice with accurate height and distance as a result, you will move faster to becoming an expert or professional player.
Proper dart board setup reduces your risk of physical stress and injuries. An incorrect height or distance can create bad throwing angles, which can cause pressure and pain on the shoulders, arms, and back. If following play with the right measurement, easily get rid of such physical problems.
Following the correct dartboard height and distance is mandatory in official competitions and tournaments for everyone. So you should respect this regulation and continue your game. Consent with the rules ensures that you are prepared for any competitive tournament in the future.
Extra Tips for How to Hang your Dartboard
If you directly connect your dartboard with stud then it’s the best. First of all you have to choose a no movable and dry wall. It must also be considered that there is sufficient space in front of that wall.
Before starting the work, different type of tools like; measurement tap, screwdriver, drill machine (optional), screw, laser etc. must be kept in your collection.
On the wall on which the dartboard will be set up, define the correct height from the floor and mark it with a marker. After that, if it is needed to drill on the wall, then drill on the wall, set up it in the right place using a leveler or laser, and stick it with the screw.
Note that the screw should not be over tight and should not be kept loose. Ensure that the board is stuck on the wall and also have to take care that it doesn’t move when throwing darts from the throw line.
Organization of Regulation Dartboard Height and Distance
The height and distance regulations for dartboards are usually set by major dart organizations. Here, the names of major darts organizations and some details are given below:
World Darts Federation (WDF)
The World Darts Federation WDF is the only world organization that establish rules and regulations on the setting of dartboard for practice and competitive purposes for the entire world.
Professional Darts Corporation (PDC)
It is a well-known professional darts organization which acting major worldwide championship events. There are rules concerning the height of the dartboard set or measured by the organizer to ensure that every professional competition has the same regulation set.
British Darts Organization (BDO)
The BDO was formerly one of the leading organizations in England and touched upon the rules for both unprofessional and semi-professional darts as well as the standard distance for the positioning of the dart board. The current rules are based on the BDO standards, although it closed later operations in 2020.
American Darts Organization (ADO)
The American Dart Organization (ADO) directs darts in the country and confirms uniformity for players in the US by following to international standards for dartboard distance and height.
It can be said that considering the health of the players and fair playing, the above organizations follow the same regulations from their respective places to make the game enjoyable and competitive.
Frequently Asked Questions (FAQs)
How far apart should dartboard be dart board distance from throw line?
Basically, the bullseye distance is 7 feet 9.25 inches (2.37 meters) from the throw line in case of using steel tip darts. The bullseye distance is 8 feet (2.44 meters) from the throw line in case of using soft tip darts which is slightly longer.
What height should a dart board be form floor?
A dartboard should be mounted from the floor level to the bullseye center point which is a distance of exactly 5 feet 8 inches (1.72 meters). There is no need to maintain different distances for soft tip darts and steel tip darts.
How to level a dartboard?
Consider a dry wall with enough space around it to place a dart board label properly. Check the level to see if the bracket horizontally sits at the correct height. Check the also horizontal and vertical levels on the dart board by the leveler. After confirming the correct leveling, attach the board to the wall with proper pressure in the screw.
What is correct distance dartboard throw line?
The correct distance is diagonally from bullseye to throw line is 9 feet 7.38 inches (2.93 meters) for the steel tip darts. For the soft tip dart, correct distance is diagonally form dartboard throw line to center bullseye is 9 feet 9.5 inches (2.98 meters).
What should dart board height and distance for kids?
The dart board height and distance can be shorter due to kid’s convenience. The standard height of the dartboard for kids is usually set at 5 feet (1.52 meters) from the floor level to the center of the bullseye. The dartboard distance is usually set at 5 feet (1.52 meters) from the darts throw line to the front end of the board.